Dr. Pankul Goel

• Department:
• Position:
• Experience (Years):

• Civil engineering
• Associate Professor (Head)
• 22

Brief Profile:

• Pankul Goel is working as Associate Professor, Head at the Department of Mechanical Engineering, IMS Engineering College, Ghaziabad. He has more than 18 years experience in teaching and has also spent four years in the industry. He has published number of articles in national and international journals. His research areas include machining, friction stir welding, optimization of design and process parameters.

Qualification:

• Ph.D. (Mechanical Engineering), 2018

Experience

• Associate Prof. (M.E.) in IMS Engineering College, Ghaziabad affiliated to AKTU, Lucknow (U.P.) from July 2014 to continue.
• Asst. Prof. (M.E.) in Vidya Engineering College, Baghpat Road, Meerut affiliated to AKTU, Lucknow (U.P.) from July 2010 to July 2014.
• Lecturer (M.E.) in Sir Chhotu Ram Institute of Engineering and Techanology, Campus of C.C.S. University, Meerut from Aug 2002 to Sept 2008.
• Faculty (M.E.) in Radha Govind Engineering College, Garh Road, Meerut affiliated to AKTU, Lucknow (U.P.) from Oct 2001 to Aug 2002.
   

Areas of Interests

• Machining, friction stir welding, optimisation of design and process parameters.

Research publications in International Journal

1. “Investigation on material mixing during FSW of AA7475 to AISI304”, Materials and Manufacturing Processes (Publisher: Taylor and Francis), impact factor 3.35, https://doi.org/10.1080/10426914.2018.1544717. 2. “Investigation on the effect of tool pin profiles on mechanical and microstructural properties of friction stir butt and scarf welded aluminium alloy 6063”, Metals 2018, 8, 74, (Publisher: MDPI, Switzerland), impact factor 2.259, https://doi.org/10.3390/met8010074. 3. “Influence of Slab Milling Process Parameters on Surface Integrity of HSLA: A Multi-performance Characteristics Optimization”, International Journal of Advanced Manufacturing Technology (Publisher: Springer London), impact factor 2.496, ISSN: 0268-3768, Vol.61, pp 859-871 (2012).

Paper presented in National Conferences

1.“Dissimilar joining of AA7475 Aluminium alloy and AISI 304 Stainless by friction stir welding”, IEEE sponsored conference IJARSE 7(1), RIMT, Bareilly, 76-84 (2018), ISSN: 2319-8354. 2.“Optimization of slab milling process parameters using Taguchi method”, Proceedings of International conference on Innovative Technologies in Mechanical Engineering (ITME-12), 2012, KIET, Ghaziabad, India.

Paper presented in International Conferences

1. Role of end- milling process parameters on surface integrity of SS-304: Integrated taguchi-grey approach, Materials Today: Proceedings, Publisher: Elsevier (In Press). 2. Optimization of turning process variables for surface integrity using taguchi technique, IOP Conference Series: Materials Science and Engineering, IOP Conference Series: Materials Science and Engineering, Volume 1149, 3rd International Conference on Futuristic Trends in Materials and Manufacturing (ICFTMM 2020) 7th-8th April 2021, Greater Noida, India 3. 3D FEM simulation on Deformation and Strain analysis for grain refinement of Mg Alloy passed through ECAP, IOP Conference Series: Materials Science and Engineering, Volume 1149, 3rd International Conference on Futuristic Trends in Materials and Manufacturing (ICFTMM 2020) 7th-8th April 2021, Greater Noida, India. 4. “Underwater Friction Stir Welding of AA6082-T6: Thermal Analysis”. IInd International Conference on Future Learning Aspects of Mechanical Engineering (FLAME - 2020), (Scopus Indexed) 5-7th August 2020, Amity Noida, India. Print ISBN978-981-13-6411-2, Online ISBN978-981-13-6412-9. 5. “Influence of Friction Stir Welding Parameters on Mechanical Properties of dissimilar AA 7475 to AISI 304” published in IOP Conference Series: Materials Science and Engineering. (Scopus Index). Paper presented ICFTMM 2019, held on 8th Nov 2019 at Delhi Technical Campus, Greater Noida. 6. “Effect of Ni-20 mg treatment and machining parameters on surface4 quality of Al (1–4) Fe-IV-1Si alloys”, published in Materials Today: Proceedings, Elsevier (Scopus Index). Paper presented in ICMPC 2020 held on 21-23rd Feb 2020, GLA University, Mathura, Uttar Pradesh. 7. “Friction Stir Welding of AA 8011: Mechanical and Microstructure Behavior”, published in Trends in Manufacturing Processes. Springer, Singapore (Scopus Indexed). Paper presented in ICFTMM 2018, held on 26-27th October 2019 at Delhi Technical Campus, Greater Noida, Uttar Pradesh. 8. Effects of Welding Parameters in Friction Stir Welding of Stainless Steel and Aluminum, published in Advances in Industrial and Production Engineering. Springer, Singapore (Scopus Indexed). Paper presented in FLAME 2018, held on 03-05th October 2018 at Amity University, Noida, Uttar Pradesh. 9. “Optimization of FSW Process Parameters During Joining of Al to Cu Using Taguchi-Based GA”, Advances in Industrial and Production Engineering, Springer, Singapore (Scopus Indexed). Paper presented in FLAME 2018, held on 03-05th October 2018 at Amity University, Noida, Uttar Pradesh. 10. “Temperature and Traverse Force Analysis During Underwater Friction Stir Welding”, published in Advances in Engineering Design, Springer, Singapore(Scopus Indexed). Paper presented in FLAME 2018, held on 03-05th October 2018 at Amity University, Noida, Uttar Pradesh. 11. “Optimization of Deep Drilling Process Parameters of AISI 321 Steel using Taguchi Method” Proceedings of ICMPC 2014 published in Procedia Materials Science, Elsevier, 2014, Vol.6, pp 1217-1225, GRIET, Hyderabad(Scopus Indexed). 12. Arshad Noor Siddiquee, S.F. Khan, Ghulam Abdul Quadir, Zahid A. Khan, Pankul Goel, Shahrul Kamaruddin, “Taguchi based grey relational analysis for multi-performance Optimization of slab milling process parameters”, Proceedings of ICADME-12, 2012, Penang, Malaysia.

FDP Attended

(i) AICTE Sponsored two weeks FDP attended on “Next Generation Materials and Manufacturing” organized by Department of Mechanical Engineering, IMS Engineering College, Ghaziabad from 16thDecember 2019 to 28th December 2019. (ii) Recipient of Gold Medal in On line FDP/Course attended on “Principles of Metal Forming Technology”, organized by IIT Roorkee under NPTEL-AICTE scheme (8 Week Course) from July 2019 to September 2019. Course Instructor: Dr. Pradeep Kr. Jha, Associate Professor, Department of Mechanical and Industrial Engineering, IIT, Roorkee. (iii) Faculty Development Program attended on “Advancement in Materials and Manufacturing” organized by Department of Mechanical Engineering, IMS Engineering College, Ghaziabad from 24th July 2017 to 28th July 2017. (iv) Faculty Development Program attended on “Advances in Thermal and Fluids Engineering Applications” organized by Raj Kumar Goel Institute of Technology, Ghaziabad, from 4thJuly 2016to 8th July 2016.

Awards & Honors

• 1. Recipient of Gold Medal in FDP/Course attended on “Principles of Metal Forming Technology”, organized by IIT Roorkee under NPTEL-AICTE scheme (8 Week Course) from July 2019 to September 2019.
• 2. Received best paper award for the paper “Influence of Friction Stir Welding Parameters on Mechanical Properties of dissimilar AA 7475 to AISI 304” to be publish in IOP Conference Series: Materials Science and Engineering. (Scopus Index) Presented on 8th Nov 2019 in ICFTTM 2019, Delhi Technical Campus, Greater Noida.

Books Authored