IMSEC Society

Email: bn.pathak@imsec.ac.in

Phone: 01204940000

Dr. Bibeka Nand Pathak

  • Department:
  • Position:
  • Experience:
  • Mechanical engineering
  • Associate Professor
  • 18

Brief Profile:

Dr. B N Pathak is serving as an Associate Professor in the Department of Mechanical Engineering at IMS Engineering College, Ghaziabad, Utter Pradesh, India. He recieved his Ph.D in Mechanical Engineering from Deenbandhu Chhotu Ram University of Science & Technology, Murthal, Sonipat, Haryana.
Dr. B N Pathak has more than Eighteen years of teaching/research/industrial experience & Specialization in Manufacturing Engineering/Material Science. He has published more than 15 research papers in various International/National journals and conferences to his credit. He has reviewed various research papers in journals and conferences. He is Associate Member of “The Institution of Engineers (India)” 8, Gokhale Road, Kolkata. He has organized many FDP, Conferences and Seminar in the institute. He has also attended many short-term courses, workshops & faculty development programme in reputed institutions.
 

Qualification:

Ph.D 2015
M.Tech. 2003
B.Tech (AMIE) 2000
 

Exprience


1. Associate.Prof. IMS Engg. College, Ghaziabad 01 Aug 2017-Till date 2.8 Year
2. Asstt.Prof. IMS Engg. College, Ghaziabad 28 May2012-31 Aug 2017 5.3 Years
3. Asstt.Prof. BRCM CET Bahal, Bhiwani, Harayana 9 Jan 2007 – 26 May 2012 5.5 Years
4. Sr.Lecturer SBMN Engg. College, Rohtak17 Nov.2003- 8 Jan.2007 3 Years & 2 Months
5. Quality Control Engineer Vikayan Private Ltd. Company, Sonipat, Inspection of product
& mould Apr. 2003-Nov.2003 7 Months

Areas of Interests

Manufacturing and Material science

Research publications in International Journal

"• B N Pathak, Pankul Goel and Arunesh Chandra; “Effect of Ni-20 mg treatment and machining parameters on surface quality of Al (1–4) Fe-IV-1Si alloys”, Materialstoday: PROCEEDINGS, Materials Today: Proceedings 26 (2020) 394–398. (Elsevier, IF-0.694) • B N Pathak and Arunesh Chandra; “Effect of Iron content and machining parameters on surface roughness of Al-1V-1Si alloys”, Recent Advances in Mechanical Engineering, Lecture Notes in Mechanical Engineering, 2020, https://doi.org/10.1007/978-981-15-8704-7_32 (Springer) • B N Pathak, K L Sahoo and Madhawanand Mishra; “Effect of machining parameters on cutting forces and surface roughness in Al-(1-2) Fe-1V-1Si alloys”, Materials and Manufacturing Processes, Vol.-28, No.-4, 2013, pp. 463-469. (Talyor and Francis, IF-2.274) • K L Sahoo and B N Pathak; “Solidification behaviour, microstructure and mechanical properties of high Fe-containing Al-Si-V alloys”, Journal of Materials Processing Technology, Vol.-209, No.-2, (2009), pp. 798-804. (Elsevier, IF-3.372) • B. N. Pathak, Arvind Kumar, K. L. Sahoo and P. Talukdar “Effect of Ni-Mg on the microstructure and properties of Al-(4-5)Fe-1V-1Si alloys”, Material Science & Engineering A Vol.-433, (2006) pp. 310-315. (Elsevier, IF-3.242) • B N Pathak, K L Sahoo and M N Mishra; “Structure and Properties of Al-1Fe-1V-1Si and Al-2Fe-1V-1Si Alloys”, International Journal of Manufacturing Technology and Research Vol.-8, No.-1, January-June 2012, pp. 54-58. • Pathak, B N; Kuchchal, Anant; Shubham, Aggrawal; Mukesh; Study of the Mechanical Properties of Aluminium-Silicon-Iron Alloy. Vivechan International Journal of Research, Vol. 9, Issue 1, 2018. pp. 55-62. • B N Pathak; “Sources of Available Renewable Energy and Peak Load Demand in India: A Review”, International Advanced Research Journal in Science, Engineering and Technology (IARJSET), Vol. 2, Special Issue 1, May 2015, pp. 224-228. • B N Pathak; “Study on Properties of Al-6Fe-1V-1Si Alloy”, VIVECHAN International Journal of Research, Vol. 5, 2014, pp. 1-4. "

Paper presented in National Conferences

"• B N Pathak, K L Sahoo and M N Mishra; ""Effect of Ni-20Mg treatment of Al-2Fe-1V-1Si alloys on its microstructure and Mechanical properties”, Proceedings of the National Conference on Trends and Advances in Mechanical Engineering, YMCA University of Science & Technology, Faridabad, Haryana, Oct 19-20, 2012, pp. 598-602. • Kanwar Pal, Sombir Sharma, B N Pathak and Arvind Sharma; ""An analysis of surface roughness and machinability of Al-Fe-Si alloys”, Proceedings of the National Conference on Trends and Advances in Mechanical Engineering, YMCA University of Science & Technology, Faridabad, Haryana, Oct 19-20, 2012, pp. 567-570. • B N Pathak, K L Sahoo and M N Mishra; “Structure and Properties of Al-(1-2)Fe-1V-1Si Alloys”, Proceedings of National Conference on Competitive Manufacturing: Strategies & Decision Support Systems, GLA University, Mathura, UP, 05-06 November 2011 pp. 29-37. • B.N Pathak, Ashwani Arora, M N Mishra and K L Sahoo; “Mechanical Behaviour of Al(4-5)Fe-1V-1Si Alloys” Proceedings of the National Conference on Recent Developments in Mechanical Engineering (RDME-2010), BRCM College Engineering & Technology, Bahal, Bhiwani, Haryana, Feb 19-20, 2010, pp. 1-3. • Sandeep Phogat, Kanwar Pal, B.N Pathak, and Sombir; “An Analysis of Sintering Mechanism” Proceedings of the National Conference on Recent Developments in Mechanical Engineering(RDME-2010), BRCM College Engineering & Technology, Bahal, Bhiwani, Haryana, Feb 19-20, 2010, pp. 272-275. • A K Sharma, B N Pathak, R K Ranjan and B K Roy; “Energy Management and Energy Audit of an Electric Arc Furnace”, Proceedings of Industrial Electronics, Drives & Embedded Systems(IEDES-2009), BRCM College Engineering & Technology, Bahal, Bhiwani, Haryana, March 07-08, 2009, pp. 206-210. • Paper presented titled “Comparative study on microstructure and Mechanical properties of Al-3Fe-1V-1Si and Al-4Fe-1V-1Si alloys” in national conference on February 26-27, 2011 held at OM institute of Technology and Management, Hisar."

FDP organized / conducted

"• Organising Member for Two weeks Faculty Development Programme held from 16-28th December 2019 on “Next Generation Materials and Manufacturing”, organized by the Department of mechanical Engg. at IMS Engineering College, Ghaziabad sponsored by AICTE, New Delhi. • Organised One week Faculty Development Programme and worked as Programme Co-convenor organized by the Department of mechanical Engg. held at IMS Engineering College, Ghaziabad from 24-28th July 2017 on “Advancements in Materials & Manufacturing” sponsored by AKTU, Lucknow, UP. "

National Seminar organized

"• Organised National Conference and worked as Co-convenor held at IMS Engineering College, Ghaziabad on May 9, 2015. • Organised National Conference and was a member of Core Advisory Committee held at BRCM CET Bahal on 19-20 February, 2010. • Organised National Conference and worked as conference coordinator held at BRCM CET Bahal on 7-8 March, 2009."

International Seminar organized

"• Organised International Conference and worked as Co-convenor held at IMS Engineering College, Ghaziabad on “Recent Advances in Non-Conventional Energy Resources using Solar based Technologies from 26th to 27th July, 2019."

Workshops Attended

"• Three days national workshop attended from 2-4 February 2017 on “Elementary Concept of Power Generation from Coal” held at IMS Engineering College, Ghaziabad and sponsored by National Power Training Institute-north region (NPTI_NR), New Delhi. • Three days ISTE sponsored National workshop is attended from 23-25th September 2011 on “ENGINEERING DRAWING-the Language of Engineers” organized by the Department of mechanical engg. at BRCM CET, Bahal. • Three days National workshop is attended from 04-06 March2011 on “Computer Aided Technologies (CA-X)” conducted by the mechanical engg. Deptt. at BRCM CET, Bahal. "

Workshops conducted

"• Organised three days national workshop and worked as Co-convenor held at IMS Engineering College, Ghaziabad from 2-4 February 2017 on “Elementary Concept of Power Generation from Coal” sponsored by National Power Training Institute-north region(NPTI_NR), New Delhi. "

FDP Attended

"• One week Faculty Development Programme Attended on Advances in Manufacturing (AIM-2021) organised by the Department of Mechanical Engineering, BIT Sindri, Dhanbad in collaboration with TEQIP III from 15 June,2021 to 19t h June,2021. • One week Faculty Development Programme Attended from 21-27th May 2021 on “Sustainable Product Design & Manufacturing”, organized by the School of mechanical Engg. at Sri Mata Vaishno Devi University, Jammu. • One week online FDP Attended from 20-24th July 2020 on “Emerging Trends, Essue and Challenges in next generation Technology”, organized by Rama University Kanpur. • Two weeks Faculty Development Programme Attended from 16-28th December 2019 on “Next Generation Materials and Manufacturing”, organized by the Department of mechanical Engg. at IMS Engineering College, Ghaziabad sponsored by AICTE, New Delhi. • One week Faculty Development Programme Attended from 02-06th July 2018 on “Reconfigurable Manufacturing System: Research Potential”, organized by the Department of mechanical Engg. at ABES Engineering College, Ghaziabad under TEQIP-III Dr. A.P.J.Abdul Kalam Technical University, UP, Lucknow. • One week Faculty Development Programme Attended from 24-28th July 2017 on “Advancements in Materials & Manufacturing”, organized by the Department of mechanical Engg. at IMS Engineering College, Ghaziabad sponsored by Dr. A.P.J.Abdul Kalam Technical University, UP, Lucknow. "

MDP Attended

"• One week online STTP Attended from 14-19th September 2020 on “Smart Manufacturing- Opportunity & Challenges”, organized by the Department of mechanical Engg. at St. Joseph’s College of Engineering, Chennai. • One week Intensive Teaching Workshop (ITW) is attended and participated from 18-23 July 2009 conducted at Birla Institute of Technology and Science, Pilani, Rajsthan. • One week short-term course is attended from 20-24 January 2009 on “Concepts and research Issues in Mechanical Engineering (COREISME)” conducted by the mechanical engg. Deptt. at DCRUST, Murthal-131039(sonepat). • Two weeks short-term course is attended from 12th to 21th July 2008 on “Mechatronics & Robotics” held at Department of Mech. Engg., NIT, Hamirpur-177005, HP, India. • One week short-term programme is attended from 07 March to 11 March 2005 on “Advanced Manufacturing Method” conducted by the mechanical engg. Deptt. at NITTR, Chandigarh. "

Books Authored

01 Author of one diploma engineering text book (Strength of Materials) published in Icon Publication, Rohtak, Haryana.

Journal

    15 Journal paper

Apply Now